Prof. Dr.-Ing. Julia Mergheim

2026

• Friedlein J., Steinmann P., Mergheim J.:
  One-way coupled staggered implementation of gradient-enhanced damage models coupled to thermoplasticity
  In: Finite Elements in Analysis and Design 253 (2026), Article No.: 104471
  ISSN: 0168-874X
  DOI: 10.1016/j.finel.2025.104471
• Mergheim J., Wallmersperger T., Wolf E., Schlichter M., Ludwig JP., Friedlein J., Gerritzen J., Devulapally DR., Chen C., Weiss D., Krome S., Reschke G., Gude M.:
  Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior
  In: Journal of Advanced Joining Processes 13 (2026), Article No.: 100402
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2026.100402
• Schwarz M., Mergheim J.:
  Finite Element Analysis of Hybrid Piezo- and Pyroelectric Energy Harvesting
  In: Applied Sciences 16 (2026), Article No.: 7552
  ISSN: 2076-3417
  DOI: 10.3390/app16157552
• Striewe M., Schmelzle L., Possart G., Meschut G., Mergheim J., Teutenberg D.:
  Analytical parameter identification for a viscoplastic material model for structural adhesive bonds
  In: Journal of Adhesion Science and Technology (2026)
  ISSN: 0169-4243
  DOI: 10.1080/01694243.2025.2611999

2025

• Burkhardt C., Soldner D., Steinmann P., Mergheim J.:
  Macroscopic Modeling, Simulation, and Optimization
  DOI: 10.1007/978-3-031-78350-0_14
• Friedlein J., Lüder S., Kalich J., Schmale HC., Böhnke M., Schlichter M., Bobbert M., Meschut G., Steinmann P., Mergheim J.:
  Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations
  In: Journal of Advanced Joining Processes 11 (2025), Article No.: 100299
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2025.100299
• Friedlein J., Mergheim J., Steinmann P.:
  Modelling of stress-state-dependent ductile damage with gradient-enhancement exemplified for clinch joining
  In: Journal of the Mechanics and Physics of Solids 196 (2025), Article No.: 106026
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2025.106026
• Rohracker M., Kumar P., Steinmann P., Mergheim J.:
  Efficient phase-field fracture simulations for fracture analysis in heterogeneous materials
  In: Computational Mechanics (2025)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-025-02685-3
• Schmelzle L., Striewe M., Mergheim J., Meschut G., Possart G., Teutenberg D.:
  Testing, modelling and parameter identification for adhesively bonded joints under the combined influence of temperature and strain rate
  In: Journal of Adhesion Science and Technology (2025)
  ISSN: 0169-4243
  DOI: 10.1080/01694243.2025.2569660
• Yang Z., Herrnböck L., Markl M., Mergheim J., Steinmann P., Körner C.:
  Mesoscopic Modeling and Simulation of Properties of Additively Manufactured Metallic Parts
  In: Dietmar Drummer, Michael Schmidt (ed.): Progress in Powder Based Additive Manufacturing, Springer Nature, 2025, p. 309-330 (Springer Tracts in Additive Manufacturing, Vol.Part F386)
  DOI: 10.1007/978-3-031-78350-0_15
• Zhou S., Rehm V., Grizfeld R., Liu Z., Han Y., Hrbek T., Matolínová I., Korczak J., Szczerbakow A., Story T., Kot M., Loi MA., Peng Z., Sotome M., Kondo T., Forberich K., Lüer L., Brabec C., Mergheim J., Heiß W.:
  Boosting the Performance of Epitaxial Perovskite Microstructures by Surface Passivation
  In: Advanced Optical Materials 14 (2025), Article No.: e03210
  ISSN: 2195-1071
  DOI: 10.1002/adom.202503210

2024

• Friedlein J., Böhnke M., Schlichter M., Bobbert M., Meschut G., Mergheim J., Steinmann P.:
  Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining
  In: Journal of Manufacturing and Materials Processing 8 (2024), Article No.: 157
  ISSN: 2504-4494
  DOI: 10.3390/jmmp8040157
• Yamamoto R., Schwarz M., Martin A., Mergheim J., Kakimoto Ki.:
  Multisource energy harvesting using (Ba,Ca)(Zr,Ti)O3 oscillating under temperature gradient
  In: Journal of the American Ceramic Society (2024)
  ISSN: 0002-7820
  DOI: 10.1111/jace.20245

2023

• Bielak CR., Böhnke M., Friedlein J., Bobbert M., Mergheim J., Steinmann P., Meschut G.:
  Numerical analysis of failure modeling in clinching process chain simulation
  20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
  In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (ed.): Materials Research Proceedings 2023
  DOI: 10.21741/9781644902417-33
• Böhnke M., Bielak CR., Friedlein J., Bobbert M., Mergheim J., Meschut G., Steinmann P.:
  A calibration method for failure modeling in clinching process simulations
  20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
  In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (ed.): Materials Research Proceedings 2023
  DOI: 10.21741/9781644902417-34
• Friedlein J., Bielak C., Böhnke M., Bobbert M., Meschut G., Mergheim J., Steinmann P.:
  Influence of plastic orthotropy on clinching of sheet metal
  20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
  In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (ed.): Materials Research Proceedings 2023
  DOI: 10.21741/9781644902417-17
• Friedlein J., Mergheim J., Steinmann P.:
  Efficient gradient enhancements for plasticity with ductile damage in the logarithmic strain space
  In: European Journal of Mechanics A-Solids 99 (2023), Article No.: 104946
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2023.104946
• Hegendörfer A., Steinmann P., Mergheim J.:
  An implicitly coupled finite element-electronic circuit simulator method for efficient system simulations of piezoelectric energy harvesters
  In: Journal of Intelligent Material Systems and Structures (2023)
  ISSN: 1045-389X
  DOI: 10.1177/1045389X231157359
• Hegendörfer A., Steinmann P., Mergheim J.:
  Numerical Optimization of a Nonlinear Nonideal Piezoelectric Energy Harvester Using Deep Learning
  In: Journal of Low Power Electronics and Applications 13 (2023), Article No.: 8
  ISSN: 2079-9268
  DOI: 10.3390/jlpea13010008
• Hübner D., Herrnböck L., Wein F., Mergheim J., Steinmann P., Stingl M.:
  Buckling optimization of additively manufactured cellular structures using numerical homogenization based on beam models
  In: Archive of Applied Mechanics (2023)
  ISSN: 0939-1533
  DOI: 10.1007/s00419-023-02503-3
• Kumar P., Mergheim J.:
  Computational modeling of fracture in polymer nanocomposites undergoing large deformations via the graded-interphase-enhanced phase-field fracture approach
  In: Proceedings in Applied Mathematics and Mechanics 23 (2023), Article No.: e202300247
  ISSN: 1617-7061
  DOI: 10.1002/pamm.202300247
• Mergheim J., Breuning C., Burkhardt C., Hübner D., Köpf J., Herrnböck L., Yang Z., Körner C., Markl M., Steinmann P., Stingl M.:
  Additive manufacturing of cellular structures: Multiscale simulation and optimization
  In: Journal of Manufacturing Processes 95 (2023), p. 275-290
  ISSN: 1526-6125
  DOI: 10.1016/j.jmapro.2023.03.071
• Nahr F., Rasch M., Burkhardt C., Renner J., Baumgärtner B., Hausotte T., Körner C., Steinmann P., Mergheim J., Schmidt M., Markl M.:
  Geometrical Influence on Material Properties for Ti6Al4V Parts in Powder Bed Fusion
  In: Journal of Manufacturing and Materials Processing 7 (2023), p. 82
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030082
• Rohracker M., Kumar P., Mergheim J.:
  A comparative assessment of different adaptive spatial refinement strategies in phase-field fracture models for brittle fracture
  In: Forces in Mechanics 10 (2023), p. 100157
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100157
  URL: https://www.sciencedirect.com/science/article/pii/S2666359722000853
• Singh S., Pflug L., Mergheim J., Stingl M.:
  On optimization of heterogeneous materials for enhanced resistance to bulk fracture
  In: Forces in Mechanics 12 (2023), Article No.: 100200
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2023.100200
• Spannraft L., Steinmann P., Mergheim J.:
  A generalized anisotropic damage interface model for finite strains
  In: Journal of the Mechanics and Physics of Solids 174 (2023), Article No.: 105255
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2023.105255
• Wiesheier S., Mergheim J., Steinmann P.:
  Discrete data-adaptive approximation of hyperelastic energy functions
  In: Computer Methods in Applied Mechanics and Engineering 416 (2023), Article No.: 116366
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2023.116366

2022

• Burkhardt C., Steinmann P., Mergheim J.:
  Thermo-mechanical simulations of powder bed fusion processes: accuracy and efficiency
  In: Advanced Modeling and Simulation in Engineering Sciences 9 (2022), Article No.: 18
  ISSN: 2213-7467
  DOI: 10.1186/s40323-022-00230-y
• Friedlein J., Mergheim J., Steinmann P.:
  Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal
  12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2022 (Toronto, ON, CAN, 10. Juli 2022 - 14. Juli 2022)
  In: Kaan Inal, Michael Worswick, Cliff Butcher, Julie Levesque (ed.): Minerals, Metals and Materials Series 2022
  DOI: 10.1007/978-3-031-06212-4_31
• Friedlein J., Mergheim J., Steinmann P.:
  Observations on additive plasticity in the logarithmic strain space at excessive strains
  In: International Journal of Solids and Structures 239 (2022)
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2021.111416
• Hegendörfer A., Mergheim J.:
  Numerical investigation of the transient charging behavior of a piezoelectric vibration-based energy harvester for different base excitations
  Active and Passive Smart Structures and Integrated Systems XVI 2022 (Virtual, Online, 4. April 2022 - 10. April 2022)
  In: Jae-Hung Han, Shima Shahab, Jinkyu Yang (ed.): Proceedings of SPIE - The International Society for Optical Engineering 2022
  DOI: 10.1117/12.2611762
• Hegendörfer A., Steinmann P., Mergheim J.:
  Investigation of a nonlinear piezoelectric energy harvester with advanced electric circuits with the finite element method
  In: SN Applied Sciences 4 (2022), Article No.: 120
  ISSN: 2523-3963
  DOI: 10.1007/s42452-022-05003-1
• Kumar P., Phansalkar D., Mergheim J., Leyendecker S., Steinmann P.:
  Computational Fracture Modeling in Heterogeneous Materials - Recent Advances and Future Challenges
  conference, WCCM-APCOM 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics (Yokohama (online), 31. Juli 2022 - 5. August 2022)
• Kumar P., Steinmann P., Mergheim J.:
  A graded interphase enhanced phase-field approach for modeling fracture in polymer composites
  In: Forces in Mechanics 9 (2022), Article No.: 100135
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100135
• Schmelzle L., Mergheim J., Possart G., Steinmann P., Striewe M., Meschut G.:
  Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung
  22. Kolloquium: Gemeinsame Forschung in der Klebtechnik (Online-Tagung, 15. Februar 2022 - 16. Februar 2022)
  (Conference report)
• Schmelzle L., Striewe M., Mergheim J., Meschut G., Possart G., Teutenberg D., Hein D., Steinmann P.:
  Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature
  In: Journal of Adhesion Science and Technology (2022), p. 1-32
  ISSN: 0169-4243
  DOI: 10.1080/01694243.2022.2125714
• Schramm B., Harzheim S., Weiß D., Joy TD., Hofmann M., Mergheim J., Wallmersperger T.:
  A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase
  In: Journal of Advanced Joining Processes 6 (2022), Article No.: 100135
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2022.100135
• Schramm B., Martin S., Steinfelder C., Bielak CR., Brosius A., Meschut G., Tro T., Wallmersperger T., Mergheim J.:
  A Review on the Modeling of the Clinching Process Chain-Part I: Design Phase
  In: Journal of Advanced Joining Processes 6 (2022)
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2022.100133
• Singh S., Pflug L., Mergheim J., Stingl M.:
  Robust design optimization for enhancing delamination resistance of composites
  In: International Journal for Numerical Methods in Engineering (2022)
  ISSN: 0029-5981
  DOI: 10.1002/nme.7168
• Spannraft L., Possart G., Steinmann P., Mergheim J.:
  Generalized interfaces enabling macroscopic modeling of structural adhesives and their failure
  In: Forces in Mechanics 9 (2022), Article No.: 100137
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100137
• Yamamoto R., Hegendörfer A., Mergheim J., Kakimoto KI.:
  Temperature-dependent vibration energy harvesting performance of polyimide/(Na,K)NbO3 piezoelectric composites
  In: Japanese Journal of Applied Physics 61 (2022), Article No.: SN1028
  ISSN: 0021-4922
  DOI: 10.35848/1347-4065/ac835c

2021

• Friedlein J., Mergheim J., Steinmann P.:
  A finite plasticity gradient-damage model for sheet metals during forming and clinching
  19th International Conference on Sheet Metal, SheMet 2021 (Virtual, Online, 29. März 2021 - 31. März 2021)
  In: Key Engineering Materials 2021
  DOI: 10.4028/www.scientific.net/KEM.883.57
• Friedlein J., Wituschek S., Lechner M., Mergheim J., Steinmann P.:
  Inverse parameter identification of an anisotropic plasticity model for sheet metal
  40th International Deep-Drawing Research Group Conference (IDDRG) (, ELECTR NETWORK)
  In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
  DOI: 10.1088/1757-899X/1157/1/012004
• Hegendörfer A., Steinmann P., Mergheim J.:
  Nonlinear finite element system simulation of piezoelectric vibration-based energy harvesters
  In: Journal of Intelligent Material Systems and Structures (2021)
  ISSN: 1045-389X
  DOI: 10.1177/1045389X211048222
• Javili A., McBride AT., Mergheim J., Steinmann P.:
  Towards elasto-plastic continuum-kinematics-inspired peridynamics
  In: Computer Methods in Applied Mechanics and Engineering 380 (2021), Article No.: 113809
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2021.113809
• Kergaßner A., Köpf J., Markl M., Körner C., Mergheim J., Steinmann P.:
  A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials
  In: Journal of Materials Engineering and Performance (2021)
  ISSN: 1059-9495
  DOI: 10.1007/s11665-021-05725-0
• Kumar P., Mergheim J.:
  Size Effects in Computational Homogenization of Polymer Nano-Composites
  In: Proceedings in Applied Mathematics & Mechanics 2021
  DOI: 10.1002/pamm.202000047
  URL: https://onlinelibrary.wiley.com/doi/abs/10.1002/pamm.202000047
• Kumar P., Steinmann P., Mergheim J.:
  Enhanced computational homogenization techniques for modelling size effects in polymer composites
  In: Computational Mechanics (2021)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-021-02037-x
• Pivovarov D., Mergheim J., Willner K., Steinmann P.:
  Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations
  In: Computational Mechanics (2021)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-021-02099-x
• Soldner D., Steinmann P., Mergheim J.:
  Modeling crystallization kinetics for selective laser sintering of polyamide 12
  In: GAMM-Mitteilungen (2021)
  ISSN: 0936-7195
  DOI: 10.1002/gamm.202100011
• Yamamoto R., Hegendörfer A., Mergheim J., Kakimoto KI.:
  Vibration energy harvesting and internal electric potential of (Na,K)NbO3/polyimide piezoelectric composites
  In: Japanese Journal of Applied Physics 60 (2021)
  ISSN: 0021-4922
  DOI: 10.35848/1347-4065/ac1c3e

2020

• Bruna-Rosso C., Mergheim J., Previtali B.:
  Finite element modeling of residual stress and geometrical error formations in selective laser melting of metals
  In: Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science (2020)
  ISSN: 0954-4062
  DOI: 10.1177/0954406220943225
• Burkhardt C., Soldner D., Mergheim J.:
  A comparison of material models for the simulation of selective beam melting processes
  In: Procedia CIRP 94 (2020), p. 52-57
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.09.011
• Hasegawa R., Mehnert M., Mergheim J., Steinmann P., Kakimoto K.:
  Behavior of vibration energy harvesters composed of polymer fibers and piezoelectric ceramic particles
  In: Sensors and Actuators A-Physical 303 (2020), Article No.: 111699
  ISSN: 0924-4247
  DOI: 10.1016/j.sna.2019.111699
• Soldner D., Greiner S., Burkhardt C., Drummer D., Steinmann P., Mergheim J.:
  Numerical and experimental investigation of the isothermal assumption in selective laser sintering of PA12
  In: Additive Manufacturing (2020)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101676
• Zabihyan R., Mergheim J., Pelteret JP., Brands B., Steinmann P.:
  FE2 simulations of magnetorheological elastomers: influence of microscopic boundary conditions, microstructures and free space on the macroscopic responses of MREs
  In: International Journal of Solids and Structures 193-194 (2020), p. 338-356
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2020.02.015

2019

• Brands B., Davydov D., Mergheim J., Steinmann P.:
  Reduced-Order Modelling and Homogenisation in Magneto-Mechanics: A Numerical Comparison of Established Hyper-Reduction Methods
  In: Mathematical and Computational Applications 24 (2019)
  ISSN: 1300-686X
  DOI: 10.3390/mca24010020
• Burkhardt C., Soldner D., Steinmann P., Mergheim J.:
  An energetically consistent heat input model for additive manufacturing
  In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201900297
• Kergaßner A., Mergheim J., Steinmann P.:
  Gradient Enhanced Crystal Plasticity in Additive Manufacturing Identification of a Macroscopic Yield Criterion
  In: Proceedings in Applied Mathematics and Mechanics (2019)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201900308
• Köpf J., Soldner D., Ramsperger M., Mergheim J., Markl M., Körner C.:
  Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
  In: Computational Materials Science 162 (2019), p. 148-155
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2019.03.004
• Pivovarov D., Zabihyan R., Mergheim J., Willner K., Steinmann P.:
  On periodic boundary conditions and ergodicity in computational homogenization of heterogeneous materials with random microstructure
  In: Computer Methods in Applied Mechanics and Engineering 357 (2019)
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2019.07.032
• Soldner D., Mergheim J.:
  Thermal modelling of selective beam melting processes using heterogeneous time step sizes
  In: Computers & Mathematics with Applications 78 (2019), p. 2183-2196
  ISSN: 0898-1221
  DOI: 10.1016/j.camwa.2018.04.036
• Spannraft L., Mergheim J., Steinmann P.:
  Implementation of generalized mechanical interfaces
  In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201900031

2018

• Greiner S., Soldner D., Jaksch A., Zhao M., Mergheim J., Steinmann P., Wudy K., Drummer D.:
  Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen
  6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 13. Dezember 2018 - 13. Dezember 2018)
• Hübner D., Gotterbarm M., Kergaßner A., Köpf J., Pobel C., Markl M., Mergheim J., Steinmann P., Körner C., Stingl M.:
  Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
  iCAT 2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
  In: Proceedings of 7th International Conference on Additive Technologies 2018
• Kergaßner A., Mergheim J., Steinmann P.:
  Modeling of additively manufactured materials using gradient-enhanced crystal plasticity
  In: Computers & Mathematics with Applications (2018)
  ISSN: 0898-1221
  DOI: 10.1016/j.camwa.2018.05.016
• Kergaßner A., Mergheim J., Steinmann P.:
  Single crystal plasticity – A mesoscale based approach for modeling the mechanics of additively manufactured Inconel 718
  In: Proceedings in Applied Mathematics and Mechanics (2018)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201800389
• Zabihyan R., Mergheim J., Javili A., Steinmann P.:
  Aspects of computational homogenization in magneto-mechanics: Boundary conditions, RVE size and microstructure composition
  In: International Journal of Solids and Structures 130-131 (2018), p. 105-121
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2017.10.009

2017

• Buerhop C., Wirsching S., Bemm A., Pickel T., Hohmann P., Nieß M., Vodermayer C., Huber A., Glück B., Mergheim J., Camus C., Hauch J., Brabec C.:
  Evolution of cell cracks in PV-modules under field and laboratory conditions
  In: Progress in Photovoltaics (2017)
  ISSN: 1062-7995
  DOI: 10.1002/pip.2975
• Buerhop C., Wirsching S., Gehre S., Pickel T., Winkler T., Bemm A., Mergheim J., Camus C., Brabec C., Hauch J.:
  Lifetime and Degradation of Pre-damaged PV-Modules - Field study and lab testing
  44th Photovoltaic Specialist Conference (PVSC) (Washington, DC, 25. Juni 2017 - 30. Juni 2017)
  In: IEEE (ed.): Conference record of the IEEE Photovoltaic Specialists Conference 2017
• Buerhop C., Wirsching S., Gehre S., Pickel T., Winkler T., Bemm A., Mergheim J., Camus C., Hauch J., Brabec C.:
  Lifetime and Degradation of Pre-damaged PV-Modules – Field study and lab testing
  44th IEEE Photovoltaic Specialists Conference (Washington D.C., 25. Juni 2017 - 30. Juni 2017)
• Fillep S., Mergheim J., Steinmann P.:
  Towards an efficient two-scale approach to model technical textiles
  In: Computational Mechanics 59 (2017), p. 385-401
  ISSN: 0178-7675
  DOI: 10.1007/s00466-016-1354-3
• Riedlbauer DR., Scharowsky T., Singer R., Steinmann P., Körner C., Mergheim J.:
  Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V
  In: International Journal of Advanced Manufacturing Technology (2017)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-016-8819-6
  URL: http://link.springer.com/article/10.1007/s00170-016-8819-6
• Soldner D., Brands B., Zabihyan R., Mergheim J., Steinmann P.:
  A numerical study of different projection-based model reduction techniques applied to computational homogenisation
  In: Computational Mechanics (2017)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-017-1428-x
• Soldner D., Steinmann P., Mergheim J.:
  Thermal modelling of selective beam melting processes using heterogeneous time step sizes
  2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, DEU, 11. Oktober 2017 - 13. Oktober 2017)
  In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017

2016

• Brands B., Mergheim J., Steinmann P.:
  Reduced-order modelling for linear heat conduction with parametrised moving heat sources
  In: GAMM-Mitteilungen 39 (2016), p. 170-188
  ISSN: 0936-7195
  DOI: 10.1002/gamm.201610011
• Kergaßner A., Mergheim J., Steinmann P.:
  Mesoscopic modelling of additively manufactured Inconel 718
  5th International Conference on Additive Technologies - iCAT2016 (Nürnberg)
  In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings 6th International Conference on Additive Technologies - iCAT2016, Ljubljana: 2016
• Kergaßner A., Mergheim J., Steinmann P.:
  Modelling additive manufactured materials using a crystal plasticity model
  In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 355-356
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201610166
• Schindler S., Mergheim J., Zimmermann M., Aurich JC., Steinmann P.:
  Numerical homogenization of elastic and thermal material properties for metal matrix composites (MMC)
  In: Continuum Mechanics and Thermodynamics (2016)
  ISSN: 0935-1175
  DOI: 10.1007/s00161-016-0515-0
• Soldner D., Brands B., Zabihyan R., Steinmann P., Mergheim J.:
  Computational Homogenisation using Reduced-Order Modelling applied to Hyperelasticity
  In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 551-552
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201610264
• Soldner D., Steinmann P., Mergheim J.:
  Reducing computational cost of the simulation of selective laser melting of PA12
  6th International Conference on Additive Technologies - iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
  In: Igor Drstvenšek, Dietmar Drummer und Michael Schmidt (ed.): Proceedings of the 6th International Conference on Additive Technologies, Ljubljana: 2016
• Zabihyan R., Mergheim J., Javili A., Steinmann P.:
  Computational Homogenization in Magneto-Mechanical Composites
  In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 501-502
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201610239

2015

• Fillep S., Mergheim J., Steinmann P.:
  Computational homogenization of one-dimensional textile structures
  7th International Conference on Textile Composites and Inflatable Structures, STRUCTURAL MEMBRANES 2015 (Barcelona, ESP, 19. Oktober 2015 - 21. Oktober 2015)
  In: Eugenio Onate, Bernd Kroplin, Kai-Uwe Bletzinger (ed.): Proceedings of the 7th International Conference on Textile Composites and Inflatable Structures, STRUCTURAL MEMBRANES 2015 2015
• Fillep S., Mergheim J., Steinmann P.:
  Computational homogenization of rope-like technical textiles
  In: Computational Mechanics 55 (2015), p. 577-590
  ISSN: 0178-7675
  DOI: 10.1007/s00466-015-1124-7
• Laumer T., Stichel T., Riedlbauer DR., Amend P., Mergheim J., Schmidt M.:
  Realization of multi-material polymer parts by simultaneous laser beam melting
  In: Journal of Laser Micro Nanoengineering 10 (2015), p. 140-147
  ISSN: 1880-0688
  DOI: 10.2961/jlmn.2015.02.0006
• Mehnert M., Fillep S., Mergheim J., Steinmann P.:
  Computational Homogenization of Micromechanically Resolved Textile Materials
• Riedlbauer DR., Steinmann P., Mergheim J.:
  Thermomechanical simulation of the selective laser melting process for PA12 including volumetric shrinkage
  The 30th International Conference of the Polymer Processing Society (Cleveland)
  In: PROCEEDINGS OF PPS-30, Cleveland, USA: 2015
  DOI: 10.1063/1.4918512
• Schmidt U., Mergheim J., Steinmann P.:
  Identification of elastoplastic microscopic material parameters within a homogenization scheme
  In: International Journal for Numerical Methods in Engineering 104 (2015), p. 391–407
  ISSN: 0029-5981
• Schmidt U., Steinmann P., Mergheim J.:
  Two-scale elastic parameter identification from noisy macroscopic data
  In: Archive of Applied Mechanics (2015)
  ISSN: 0939-1533

2014

• Fillep S., Mergheim J., Steinmann P.:
  Microscale modeling and homogenization of rope-like textiles
  85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Erlangen)
  In: Proc. Appl. Math. Mech., Weinheim: 2014
  DOI: 10.1002/pamm.201410262
• Riedlbauer DR., Drexler M., Drummer D., Steinmann P., Mergheim J.:
  Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12
  In: Computational Materials Science 93 (2014), p. 239-248
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2014.06.046
• Riedlbauer DR., Mergheim J., Steinmann P.:
  Simulation of the temperature distribution in the selective beam melting process for polymer material
  29th International Conference of the Polymer Processing Society (Nuremberg, Germany, 15. Juli 2013 - 19. Juli 2013)
  In: 29th International Conference of the Polymer Processing Society, USA: 2014
  DOI: 10.1063/1.4873876
• Riedlbauer DR., Mergheim J., Steinmann P.:
  Thermomechanical Simulation of the Electron Beam Melting Process for TiAl6V4
  GAMM 2014 (Erlangen, Germany, 10. März 2014 - 14. März 2014)
  In: Proceedings in Applied Mathematics and Mechanics, Erlangen, Germany: 2014
  DOI: 10.1002/pamm.201410219
• Riedlbauer DR., Steinmann P., Mergheim J.:
  Simulation von Temperaturfeldern und mechanischen Materialverhalten in additiven Fertigungsprozessen
  3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nuremberg, Germany, 12. April 2014)
  In: 3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2014
• Riedlbauer DR., Steinmann P., Mergheim J.:
  Thermomechanical finite element simulations of selective electron beam melting processes: Performance considerations
  In: Computational Mechanics 54 (2014), p. 109-122
  ISSN: 0178-7675
  DOI: 10.1007/s00466-014-1026-0

2013

• Drexler M., Drummer D., Wudy K., Riedlbauer DR., Steinmann P., Mergheim J.:
  Selektives Laserstrahlschmelzen von Kunststoffen - Modellierung des Temperaturhaushaltes und Einfluss auf resultierende Bauteileigenschaften
  2. Industriekolloquium des SFB 814 (Nürnberg)
  In: 2. Industriekolloquium des SFB 814 2013
• Fillep S., Mergheim J., Steinmann P.:
  Computational modelling and homogenization of technical textiles
  In: Engineering Structures 50 (2013), p. 68-73
  ISSN: 0141-0296
  DOI: 10.1016/j.engstruct.2013.01.025
• Fillep S., Mergheim J., Steinmann P.:
  Homogenization of heterogeneous, fibre structured materials
  COMPLAS XII (Barcelona, Spain, 3. September 2013 - 5. September 2013)
  In: COMPLAS XII - XII Inernational Conference on Computational Plasticity. Fundamentals and Applications, Barcelona, Spain: 2013
• Javili A., McBride AT., Mergheim J., Steinmann P., Schmidt U.:
  Micro-to-macro transitions for continua with surface structure at the microscale
  In: International Journal of Solids and Structures 50 (2013), p. 2561-2572
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2013.03.022
• Mergheim J., Possart G., Steinmann P.:
  Modeling and simulation of curing and damage in thermosetting adhesives
  In: Journal of Adhesion 89 (2013), p. 111
  ISSN: 0021-8464
• Mergheim J., Steinmann P.:
  Phenomenological modelling of self-healing polymers
  In: Computational Mechanics 52 (2013), p. 681-692
  ISSN: 0178-7675
  DOI: 10.1007/s00466-013-0840-0

2012

• Fillep S., Mergheim J., Steinmann P.:
  Homogenization and modelling of technical textiles
  ECCOMAS 2012 (Vienna, Austria)
  In: European Congress on Computational Methods in Applied Sciences and Engineering Proceedings, Viena, Austria: 2012
• Fillep S., Mergheim J., Steinmann P.:
  On the homogenization of technical textiles
  In: Bytes and science, Barcelona: International Center for Numerical Methods in Engineering, 2012, p. -
  ISBN: 9788494024320
• McBride A., Mergheim J., Javili A., Steinmann P., Bargmann S.:
  Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch
  In: Journal of the Mechanics and Physics of Solids 60 (2012), p. 1221-1239
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2012.01.003
• Mergheim J., Possart G., Steinmann P.:
  Modelling and computation of curing and damage of thermosets
  In: Computational Materials Science 53 (2012), p. 359-367
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2011.09.013
• Riedlbauer DR., Mergheim J., Steinmann P., McBride A.:
  Macroscopic modelling of the selective beam melting process
  83rd GAMM (Darmstadt, Germany)
  In: Proceedings in Applied Mathematics and Mechanics, Darmstadt, Germany: 2012

2011

• Schmidt U., Mergheim J., Steinmann P.:
  Computational Homogenization and Parameter-Identification for Heterogeneous Inelastic Materials
  GAMM 2011 (Graz, Austria)
  In: Proceedings of Applied Mathematics and Mechanics (PAMM), Weinheim: 2011
  DOI: 10.1002/pamm.201110447
• Schmidt U., Mergheim J., Steinmann P.:
  Two-Scale Parameter Identification for heterogeneous elastoplastic materials
  COMPLAS XI (Barcelona, Spain, 7. September 2011 - 9. September 2011)
  In: Proceeding of 11h International Conference on Computational Plasticity, Fundamentals and Applications 2011

2010

• Fischer P., Mergheim J., Steinmann P.:
  On the C1 continuous discretization of nonlinear gradient elasticity: a comparison of NEM and FEM based on Bernstein-Bézier patches
  In: International Journal for Numerical Methods in Engineering 82 (2010), p. 1282-1307
  ISSN: 0029-5981
  DOI: 10.1002/nme.2802
• Fischer P., Mergheim J., Steinmann P., Mueller R., Klassen M.:
  Isogeometric Analysis of 2D Gradient Elasticity
  In: Computational Mechanics (2010)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-010-0543-8
• Mergheim J., Steinmann P., Ricker S., Müller R.:
  A Comparison of Different Approaches in the Multi-Scale Computation of Configurational Forces
  In: International Journal of Fracture (2010), p. accepted
  ISSN: 0376-9429
  DOI: 10.1007/s10704-010-9525-2
• Schmidt U., Mergheim J., Steinmann P.:
  Multi-Scale Parameter Identification
  In: International Journal For Multiscale Computational Engineering 10 (2010), p. 327-342
  ISSN: 1543-1649
  DOI: 10.1615/IntJMultCompEng.2012002175
• Schmidt U., Mergheim J., Steinmann P.:
  Parameter Identification over Multiple Scales
  MMM V (Freiburg, Germany)
  In: Proceedings of the 5th conference on Multiscale Materials Modelling 2010

2009

• Mergheim J.:
  A Variational Multiscale Method to Model Crack Propagation at Finite Strains
  In: International Journal for Numerical Methods in Engineering 80 (2009), p. 269-289
  ISSN: 0029-5981
  DOI: 10.1002/nme.2602
• Mergheim J.:
  Simulation of failure processes with the variational multiscale method
  ESAFORM XII (Twente, Netherlands)
  In: Proceedings of the 12th International ESAFORM Conference on Material Forming 2009
  DOI: 10.1007/s12289-009-0441-9
• Mergheim J., Steinmann P., Ricker S.:
  On the Multiscale Computation of Defect Driving Forces
  In: International Journal For Multiscale Computational Engineering 7 (2009), p. 457-474
  ISSN: 1543-1649
  DOI: 10.1615/IntJMultCompEng.v7.i5.70
• Ricker S., Mergheim J., Steinmann P.:
  Computational Homogenization of Defect Driving Forces
  IUTAM Symposium 08-6 (Erlangen, Germany, 20. Oktober 2008 - 24. Oktober 2008)
  In: Proceedings of the IUTAM Symposium on Progress in the Theory and Numerics of Configuration Mechanics (peer reviewed) 2009
  DOI: 10.1007/978-90-481-3447-2_23

2008

• Mergheim J.:
  A Multiscale Approach for the Modelling of Failure
  GAMM-Jahrestagung 2008 (Bremen, Germany)
  In: Proceedings of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics 2008
  DOI: 10.1002/pamm.200810555
• Mergheim J., Steinmann P., Menzel A., Ricker S.:
  Continuum-Atomistic Coupling based on Computational Homogenization
  GAMM-Jahrestagung 2008 (Bremen, Germany)
  In: Proceedings of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics 2008
  DOI: 10.1002/pamm.200810565

2007

• Mergheim J., Kuhl E., Steinmann P.:
  Towards the Algorithmic Treatment of 3D Strong Discontinuities
  In: Communications in Numerical Methods in Engineering 23 (2007), p. 97-108
  ISSN: 1069-8299
  DOI: 10.1002/cnm.885
• Mergheim J., Steinmann P., Kuhl E., Jäger P.:
  Modelling and Computation of 3D Discontinuities in Solids
  Berlin, (Germany)
  In: Proceedings GAMM'06 2007
  DOI: 10.1002/pamm.200610172
• Ricker S., Mergheim J., Menzel A., Steinmann P.:
  Variational issues in the homogenization of discrete systems
  Cachan, (France)
  In: Proceedings of ECCOMAS 2007
• Roger J., Mergheim J., Zimmermann A., Coutellier D.:
  Three-dimensional simulation of fatigue crack growth in epoxy resins
  Bruchmechanik und Bauteilsicherung (Dresden, Germany)
  In: DVM Tagungsband: 2007

2006

• Kuhl E., Jäger P., Mergheim J., Steinmann P.:
  On the Application of Hansbo's Method for Interface Problems
  IUTAM Symposium on Discretization Methods for Evolving Discontinuities (Lyon, France)
  In: Proceedings of IUTAM Symposium on Discretization Methods for Evolving Discontinuities 2006
• Mergheim J., Steinmann P.:
  A Geometrically Nonlinear FE Approach for the Simulation of Strong and Weak Discontinuities
  In: Computer Methods in Applied Mechanics and Engineering 195 (2006), p. 5037-5052
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2005.05.057

2005

• Mergheim J.:
  Computational Modeling of Strong and Weak Discontinuities (Dissertation, 2005)
• Mergheim J., Kuhl E., Steinmann P.:
  A Finite Element Method for the Computational Modelling of Cohesive Cracks
  In: International Journal for Numerical Methods in Engineering 63 (2005), p. 276-289
  ISSN: 0029-5981
  DOI: 10.1002/nme.1286
• Mergheim J., Steinmann P., Kuhl E.:
  A finite element method for cohesive crack modelling
  Luxembourg, (28.03-)
  In: Proceedings GAMM'05 2005
  DOI: 10.1002/pamm.200410156
• Steinmann P., Mergheim J.:
  A computational method for the FE simulation of strong and weak discontinuities
  Oberwolfach, (Germany)
  In: Proc. Workshop Gemischte und nicht-standard FE-Methoden 2005

2004

• Mergheim J., Kuhl E., Steinmann P.:
  A Hybrid Discontinuous Galerkin Interface Method for the Computational Modelling of Failure
  In: Communications in Numerical Methods in Engineering 20 (2004), p. 511-519
  ISSN: 1069-8299
  DOI: 10.1002/cnm.689
• Mergheim J., Steinmann P., Kuhl E.:
  A new approach for the FE modelling of cohesive cracks
  ICTAM XXI (Warszawa, Poland)
  In: Proceedings of 21st International Congress of Theoretical and Applied Mechanics 2004

2003

• Mergheim J., Kuhl E., Steinmann P.:
  Modelling of failure with a hybrid dG/ interface approach
  Padua, (Italien)
  In: Proceedings GAMM'03 2003
• Mergheim J., Steinmann P., Kuhl E.:
  Computational Modelling of Failure with the Discontinuous Galerkin Method
  LUXFEM I (Luxembourg, Luxembourg)
  In: Proceedings of the 1st International LUXFEM Conference 2003
  DOI: 10.1002/pamm.200310425

2002

• Mergheim J.:
  Parameteridentifizierung des Kalziumauslaugens von Beton (Diplomarbeit, 2002)